St Louis
-
8 min readTo replace the bulb or LED in a headlamp, you will need to follow these steps:Start by opening the hood of your vehicle and locating the back of the headlamp assembly. Depending on your headlamp design, you may need to remove the headlamp cover or dust cap. This is usually done by twisting or pulling it off. Once the cover or dust cap is removed, you will have access to the bulb or LED. Locate the bulb holder, which is typically a plastic or metal piece that holds the bulb in place.
-
7 min readTo adjust the angle of the light beam on a headlamp, you'll need to follow a few simple steps.Start by locating the adjustment knobs or screws on your headlamp. These are usually located on the side or back of the lamp and are designed for vertical and horizontal adjustment. Hold the headlamp in your hand or wear it on your head while facing a flat wall or surface approximately 10 feet away. This will provide a clear reference point for adjusting the angle.
-
9 min readTo switch between lighting modes on a headlamp, you typically need to follow these steps:Familiarize yourself with the headlamp: Every headlamp is slightly different, so it's helpful to understand the design and locate the buttons or switches used for mode switching. Identify the mode control button: Look for a button or switch specifically designated for changing modes. It is usually located on the side or top of the headlamp.
-
5 min readTo change the batteries in a headlamp, you will need to follow these steps:Locate the battery compartment on your headlamp. This is usually found on the back or side of the headlamp casing.Open the battery compartment by sliding it off, pulling it open, or removing the screw that secures it, depending on the design of your headlamp.Take note of the orientation of the existing batteries to ensure you insert the new ones correctly.
-
7 min readTo adjust the brightness settings on a headlamp, begin by locating the control button or switch. This is usually situated on the headlamp housing or may be integrated into the strap.Once the control button is located, turn on the headlamp by pressing and holding the button or flipping the switch. Most headlamps have multiple brightness settings that you can cycle through.To adjust the brightness level, press the control button briefly and repeatedly until you find the desired brightness.
-
15 min readSimple Moving Average (SMA) is a popular technical analysis tool used by traders in various financial markets, including scalpers. It is a commonly used indicator to identify trends, track price movements, and make trading decisions.The SMA is calculated by adding up a specific number of closing prices of an asset over a certain period and then dividing the sum by that period's length.
-
9 min readThe Commodity Channel Index (CCI) is a popular technical analysis indicator that is frequently used in day trading. It was developed by Donald Lambert in 1980. The CCI is primarily designed to identify cyclical trends in commodity prices, but it is also used in analyzing stocks, currencies, and other financial instruments.The CCI is a momentum-based oscillator, meaning it measures the strength and direction of price movement.
-
10 min readRate of Change (ROC) is a mathematical concept used to measure the speed or velocity at which a variable changes. It quantifies the relationship between two variables and determines how quickly one variable is increasing or decreasing relative to another.ROC is defined as the ratio of the change in the dependent variable to the change in the independent variable over a specified time period.
-
9 min readTo export D3.js visualizations as SVG or PNG images, you can follow these steps:Install the necessary libraries: To export D3.js visualizations, you'll need to install the d3-file-export library, which provides the functionality to save SVG or PNG images. Import the required modules: In your JavaScript file, import the necessary modules using the following code: import { saveSvg, savePng } from 'd3-file-export'; Save as SVG: To save your D3.
-
15 min readIchimoku Cloud is a versatile technical analysis tool that can be used for day trading. It consists of five lines, namely Tenkan-Sen (conversion line), Kijun-Sen (base line), Senkou Span A (leading span A), Senkou Span B (leading span B), and Chikou Span (lagging span). These lines work together to generate trading signals and provide insights into market trends and support/resistance levels.
-
10 min readData aggregation or summarization in D3.js refers to the process of condensing a large dataset into smaller, more manageable chunks of information for visualization purposes. This can be done by employing various techniques such as grouping, binning, or filtering the data.One common approach to implement data aggregation in D3.js is by using the d3.nest() function. This function allows you to group data based on specific attributes or keys.